How to Install Toner in Brother Printer in Quick Steps?
Undeniably, Brother printers are one of the most handy and efficient printing devices, used most in the home and offices. But, when the printer starts printing faded or streaky prints, then it indicates the signs to change the toner cartridges. In this blog, you will learn the easy steps of How to Install Toner in Brother Printer at home. So, follow this quick guide and get back to seamless printing.
How to Install Toner in Brother Printer: Quick Steps!
Meanwhile, replacing the toner cartridges on the Brother printer is important to maintain high-quality prints and smooth printer operation. If you want to learn how to install Toner Cartridge in Brother Printer, follow these simple steps:
- First, unpack your brand new Brother printer.
- Now, take all the other components out of the box.
- Then, ensure that your printer is not turned on yet.
- After that, open the front door of the printer.
- Now, unpack the new pack of toner cartridges.
- Most importantly, check that these toner cartridges are compatible with your printer.
- After that, insert the new toner cartridges into the printer with the logo on the top.
- Push it down a little and close the door.
- Finally, the brother toner cartridges are installed.
Replacing the Brother Printer Toner Cartridges
However, you have learned the quick steps to install the toner cartridges in a newly purchased Brother printer. In this section, you will learn how to Install Toner in Brother Printer. So, read the below instructions:
- Initially, make sure the Brother printer is turned on.
- Then, open the front door of the printer.
- Further, remove the toner cartridges and drum unit from your printer.
- After that, push down the green lock lever and take out the toner cartridge from the drum unit.
- Now, unpack the new toner cartridge and remove its protective cover.
- Hold its handle and shake it from left to right several times.
- Then, push the toner cartridges slowly into the drum and check until it sets into its place.
- After that, clean the corona wire inside the drum unit,
- Further, align the tab in the Home position with the arrow on the drum unit.
- Now, reinsert the toner cartridge and drum unit assembly into the printer.
- Finally, close the cover of the machine.
Bottom Line
To sum up, this guide has succinctly defined how to Install Toner in Brother Printer. Additionally, you have also learned the quick instructions to remove and replace the toner cartridges from the Brother printer. Now, you can enjoy a seamless printing experience at your home.